BambuLab X1 and P1s, Lift the lid more easily

This model is heavily inspired by the lift-kit of Zakm0n ( https://www.printables.com/model/287928-bambu-x1-lid-lift-kit ).

With the AMS on top of the X1, placing and removing only two spacers is more easy.

The lid will be at an angle of 3.24 degrees, low enough to keep the AMS sturdy in place and high enough to create an opening of 2 cm at the front to dissipate the build up heat.

Happy venting :)

PS. lifting the top, will give more fumes.

Warning: Placing and using the pieces makes the glass more vulnerable.

Design by Coat Over on MakerWorld (license: CC0).