Black and white Animal Bookmarks SET OF 10 V2

You asked we listened. 
This is a revamp of our orignal sets 
https://makerworld.com/en/models/1072276-black-and-white-animal-bookmarks-set-1#profileId-1062380
https://makerworld.com/en/models/1073076-black-and-white-animal-bookmarks-set-2#profileId-1063367 

We have slighly thinned, added a rounded corner and a hole to add tassels at your leisure. 

To make it easier I have added the complete set of 10 over two plates for the larger machines but also for the minis I have included 2 bookmarks to each plate. 

To print - Follow the follow instructions - 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 51.98x153.99mm in size

IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 3.04mm and the Actual Thickness is 1.44mm

Filaments Used:
    #000000 PLA Sunlu Matte Black  Transmission Distance: 0.1
    #ffffff PLA sunlu white  Transmission Distance: 6.8

This print uses 2 unique filaments

Swap Instructions:
    Start with Matte Black
    At layer #10 (0.88mm) swap to white for the rest.



 

Design by 3dGlow on MakerWorld (license: BY-ND).