Brio compatible steam train (Fully printable!)

Fully 3d printable Brio-compatible train locomotive. 

The carts can either be connected by 3d printed rings and hooks, or additionally, a 5x5mm round magnet can be inserted

Also check my other trains and rails:

Coal wagon: https://makerworld.com/en/models/1267820-fully-printable-brio-lillabo-compatible-train-cart#profileId-1293900

Articulated tracks and more: https://makerworld.com/en/models/1267814-various-generic-and-custom-brio-tracks#profileId-1293895

Transport wagon: https://makerworld.com/en/models/1267784-fully-printable-brio-compatible-train-wagon#profileId-1293860

Passenger wagon: https://makerworld.com/en/models/1267753-fully-printable-brio-compatible-train-wagon#profileId-1293822

The train is supported by custom support with a PETG interface layer. If you are unable to provide petg, don't forget to remove the custom support and add automatic support

Assembly is relatively straightforward:

1. The carriages come in two halves that can be snapped together with a dovetail. 

   

2. 

3. The assembled carriage can be screwed onto the main body with the provided printed screws. Hand tightening is enough, but a flathead screwdriver can also be used.

   

4. If PETG is used as an interface between the custom support, a scraper can be used to peel off the support and the thin layer of PETG

    

5. The dome, exhaust, and connector hook can be press-fitted in (or glued if the tolerances do not allow the former). The same is true for the magnet if it is chosen over the hook.
   
    

Design by Unhinged on MakerWorld (license: BY).