Build plate rack - X1/P1

As many of us, I also needed some storage solution for my build plates. Sadly most of the current solutions take 10+ hours to print - which is a lot, at least for me. I also have the AMS holder riser slider by Sanja3D which has a profile on the side that can be used as a hanger that I wanted to use.

So here's my soultion! You can store upto 4 plates for P1/X1 in it - prints in less than 5 hours.

Fast to print, easy to assemble! No tools needed, no screws needed, just click together!

Remix for 6 plates > > > https://makerworld.com/en/models/1261606

Remix for 8 plates > > > https://makerworld.com/en/models/1018680

There is a stand and a hanger included on the second plate - also clicks to the top/bottom part, a bit difficult to remove though, think carefully before installing. Maybe some tolerances still need minor adjustments but it's a good starting point I think.

Update 12/01/2024:

Added a print profile with a hanger if you have no riser/slider just the original glass top lid.

Update 01/21/2025:

Uploaded Fusion 360 files - for those who want to further edit the models…

Updated STL files with 1mm taller front/back, soon will replace print profile as well to include this modification.

Design by uniko92 on MakerWorld (license: BY).