Communal Mailbox pullout shelf 29.5 x 42.9 x 8cm

I was recently given a Canadian communal mail box and seeing as I am 6'3" and about 230lbs and mail box slot is only about 8cm high and about 43cm deep I struggled to get my hand in all the way back. I decided to print a simple mail box shelf so I can pull out my mail. Given the size of the shelf I had to split the print into 4 plates and added some connectors. I used crazy glue to connect everything and then used a soldering iron and a piece of PLA filament to bond it better. I holds surpisingly well all things considered and does what I needed it too. Considering I got the bottom most slot I know longer have to get down on my knees in the snow to check the EMPTY mail box. I also added something to grab on to for those cold days and you are wearing thick gloves.

I will update with pictures soon when I print another model

Dimensions are as follows

29.5cm (w) x 42.9cm (d) x 8cm (h)

in inches

 (11.6" x 16.9" x 3.15")

Design by Ph0tin0 on MakerWorld (license: BY).