Cosplay or Play Long Necklace Chain

Great option for adding a printed chain for cosplay, event, or kids' toy necklaces. This remix scales the MakerWorld model to 45% and combined three lengths of the original for a necklace-length chain. I have only tested in TPU at this point. I could see it doing well in PLA+ or PETG as well. 

This chain is a whopping 810.3mm or 32" long. You can customize the length by opening in Bambu Studio. Just break into Objects and delete the section or sections you don't need. Each one is 270.9 mm or 10.66". 

Heads up: if you further break the chain segments into Objects or Parts they compress together in a smaller ring in Bambu Studio. You can probably manually delete and place them for a truly custom length if you're really dedicated. You can also cut off links to get exactly the length you want. Suggestions for different combos:

• Full-length (All 3 Parts): Long necklace, tiered necklace, or wrapped stacked bracelet
• Medium (2 Chain Segments): Shorter necklace, shorten for a choker-length chain
• Short (1 Chain Segment):  Bracelet, trim to size; choker necklace for a smaller neck

Shout out for the full-size print-in-place chain segment by the designer @fast_349090 on Printables and to the MakerWorld remix by @hunterfamily199. Click the remix info to hop right over to the models that made this remix possible.

Design by 3DMagpie on MakerWorld (license: CC0).