Customizable Animal Bowl Stand

A simple but sturdy stand designed to raise pet bowls to a more comfortable height. The model is fully customizable in MakerWorld, letting you adjust both the height and bowl diameter to fit your pet’s needs.

Printing

• Recommended: PLA or PETG
• 15% gyroid infill and 4 walls (tested setup)
• Print the legs standing upright with supports enabled
• Use a brim for better bed adhesion

Assembly

1. Join the two legs together using the half-lap joint.
2. Align the pegs on the legs with the cutouts in the bowl shelf.
3. Press the shelf down firmly until seated.
4. How tight the joints are will depend on your individual tolerances. If they're slightly loose, add a dab of glue.

Customization

There are two parameters, one for the diameter of the bowl opening and another for the height to the plate. Adjust as necessary and export the model:

1. Split to objects

   

2. Rotate the legs by 45°.

3. Auto arrange the parts and you should have two plates.

   

4. Print using the provided settings. If you have good plate adhesion, you can disable the brim.

Design by TheProjectWheel on MakerWorld (license: CC0).