CW_RTX4090 FAN MOD 反叶rtx4090公版风扇框

4090FAN ADAPTER FOR THE Clockwise ONE

A mod of the RTX4090 founder's edition's Fan which is cheap but high quality you can buy.this will help you to apply it on chassis or a radiator This is a free open source mod for All Diyers,you can download the file and 3D print it.

For users: You're expected to prepare these items listed below to finish assembling

1. You are supposed to have 4 m2 screws of 3mm length apply on the adapter.

2. m3 or m3.5 screw(length~20mm) for mount on chassis or radiator

define of the FPC pins: face to the pin side,upward,THEY ARE +12V,+12V,PWM,GND,FG,GND. connect one pare of the +12v and GND and it is good to go

have fun

中文：

4090反叶款风扇，CW款适配外壳，适用于CW顺时针转向的4090公版风扇

RTX4090风扇MOD适配模型

安装须知

1. m2平头螺丝，使用螺丝固定风扇与框架

2. m3沉头螺丝，长度20mm左右，用于风扇与机箱的固定

FPC针脚定义：面对金手指，排线指向上方，依次是 +12V,+12V,PWM脉冲调速信号，接地，测速线，接地

欢迎下载，转载请标明出处

Design by C4talyst on MakerWorld (license: BY).