Step up your tabletop gaming experience with the D20 Slot Machine Dice Tower! This unique 3D model combines the thrill of a classic slot machine with the functionality of a dice tower. With its eye-catching design and practicality, it's the perfect addition to any gaming session. Did I also mention it has a storage compartment for your dice? Neat-o!
Print Settings:
Body
0.2 layer height
3 walls
10% Infill
Bridging enabled
No brim
No supports
Spring, Key, Arm, Blocker, D20, Lid
0.2 layer height
3 walls
25% Infill
No supports
Key, D20
0.2 layer height
3 walls
25% Infill
No supports
Scale if tolerances are too loose or too tight
Assembly Instructions:
Print one of each part
Insert Key into Blocker (It should hold with friction, use Super Glue if needed)
Insert Blocker into the side of the Body with the Key facing outward.
Insert Blocker all the way and turn clockwise so the key is now vertical.
Slide the Spring onto the Key and fit the Spring into the slot. (Spring should have slight tension)
Press the D20 onto the end of the Lever. (It should hold with friction, use Super Glue if needed)
Press the Lever onto the end of the Key so the Lever is Pointed up. (It should hold with friction, use Super Glue if needed)
Design by HannaBannah on MakerWorld (license: BY).
