daenerys en drogon

Project: daenerysbeige.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.7mm

Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA Overture Chocolate Transmission Distance: 0.2
PLA BambuLab Basic Beige Transmission Distance: 8
PLA Smart Recycled White Transmission Distance: 5.7
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Chocolate
At layer #14 (1.2mm) swap to Beige
At layer #25 (2.08mm) swap to White for the rest.

Design by quikytona on MakerWorld (license: BY).