Display Case

As I got few requests for a same size Display Case but for thicker (2mm) Acrylic/Glass sheets, I have done this Remix.

Changes done from original model are:

• Window groves for thicker (2mm) glass
• Base now is 4mm wider. Change needed to fit 2mm glass
• Upgraded Windowed top Lid.

Acrylic or Glass for windows to be used are 5x7in (12.7mm x 17.78mm) x2mm
Like those ones on Amazon

Part List:

• Solid Base (Optional)
• Hollowed Base (optional)
• Corner Pillar - need to print 4 of them
• Top Support Bracket
• Solid Top Lid (Optional)
• Windowed Top Lid - Top Part (Optional)
• Windowed Top Lid - Bottom Part (Optional)
• Acrylic or Glass sheet 12.7mm x 17.78mm x 2mm. 4 sheets per Display case
• If You are going to use a Windowed Top Lid then you will need to cut one Acrylic sheet (or get one) to the size 12.7mm x 12.7mm x 2mm

All the Assembly is the same as You can find on Original Model's description.

You can Buy me a coffee if You want to support me in my work here :)

https://www.buymeacoffee.com/warlogh

(And very Big Thank You For interest in my work)

Design by warlogh on MakerWorld (license: BY).