Frog Tape Masking Tool 1.41 inch (36mm)

Frog Tape Masking Tool
A 3D printable utility tool for precise painter's tape application

Print Specifications:
- Print Time: ~2-3 hours
- Material: PLA/PETG recommended
- Infill: 20-25%
- Support: Minimal supports required
- Layer Height: 0.2mm - .56mm (if you have the .8 nozzle)
- Nozzle: 0.4mm standard or .8mm

Compatibility:
- Designed specifically for 36mm (1.41") Frog Tape
- May work with other similar width painter's tapes
 

Design by daveposh on MakerWorld (license: CC0).