Gaming Chair 65MM Wheel Stopper

The design is by NerdandoCom. It worked really well with my gaming chair that uses 65mm wheels and was exactly what I needed for my sim racing setup. Thought to upload it here so it is more accessable to others. 


"I have designed this wheel stopper for my Diablo X-Player chair since i couldn't find any model or project that would enclose perfectly its 65mm wheels. Also, this design avoids any possible side-swing that could potentially damage each half-wheel.

It should fit any 65mm wheel for any model of chair.

You can print it in whichever filament you like and with more or less any wall and infill setting. I only recommend to use at least 4-5 top and bottom layers, enough to give solid filling for the zone where the weight is applied, on the bottom of the two wheel sockets.

I have printed two stops, and put 4 rubber anti-skid feets under each of them. This could a bit of a overkill, but now the chair is basically fixed on the ground! Anyway, the stoppers work perfectly even without rubber feets (on a normal stone-like floor)"

Link to original: https://www.thingiverse.com/thing:4929364

Design by Rayeatburger on MakerWorld (license: BY-ND).