Gojo Satoru Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 112.62x200mm in size
You may print at higher layer heights below the Base Thickness of 0.52mm
The Max allowed Thickness is 2.28mm and the Actual Thickness is 2.27997mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.68mm) swap to Blue
    At layer #13 (1.16mm) swap to Cyan
    At layer #20 (1.72mm) swap to Jade White for the rest.

Design by S1M0N389 on MakerWorld (license: BY-SA).