Gridfinity Bambu replacement bin .6mm nozzle Remix

I tried to print the model from crazywako while I had a .6 nozzle mounted in my P1S.

I saw in the slicer that the honeycomb walls for the grease will not work.

I was not able to adjust the settings to make the model work for my .6mm nozzle.

Since I am planning to print a lot of other stuff with the .6mm nozzle, I did not want to swap it back to .4mm just for this print.

So I replaced the honeycomb walls with solid walls and the print worked fine.

Printed in Polyterra PLA on P1S.

Design by Printoffel on MakerWorld (license: BY).