Gridfinity screw organiser 1x2x4 w/ 3 compartments

I realised that 1x1 bins were taking up a lot of room in my drawers and weren't being filled. Half sided bins would have been too small to use so I opted for 1x2 bins with 3 compartments; allowing for 3 different screw/bolt/nut/etc. to fit inside of a 1x2 grid instead of only 2 combinations.

At 4u high this model fits stacked 2 high in the shallow drawers of my wide Alex drawers (the 67x66 cm size ones found here https://www.ikea.com/au/en/p/alex-drawer-unit-on-castors-white-30485425/) or 3 high in the deep drawers in the standard size Alex drawers (36x70 cm https://www.ikea.com/au/en/p/alex-drawer-unit-white-40473549/).

I print all of my organisation with a 0.6mm nozzle so there is a profile for both 0.6mm and 0.4mm nozzles. 

I split also added 2 plates, plate 1 has a single bin and plate 2 has 10 bins.

Design by user_2667193848 on MakerWorld (license: BY-SA).