Haunting Spirit - Can Holder / Beer mug

Haunting Spirit can holder

• Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz or 330ml (slim) cans (link below)
• Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, brim, Custom (32°) easy supports - only 17g - (pic below), Print upside down!  (pic below)
• Just use my sliced profile:)
• Free licence

Supports added manually only at the eyes, mouth, and handle - only 17g!

Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans, and 10mm riser if you want better access to the top. They are scalable, so you can make them smaller or larger in your slicer.

https://makerworld.com/cs/models/1499777-can-holder-riser-inserts-12oz-slim-330ml-scalable#profileId-1568806

Happy printing:)

Design by RUMcajz on MakerWorld (license: BY).