Hbada M5 Headrest Riser + M6 nuts

This model has been upscaled to be compatible with the Hbada M5 chair headrest screw ports on the back of the chair. (3.25 inches between the screw holes specifically)

Includes x2 M6 nuts which I recommend printing in a sturdy material, I used PETG.

To install the headrest onto the 3d printed adapter, I used two longer screws from the armrests (there are 3, which imo 2 is enough) and continued to use the included screws to screw the 3d printed part into the chair.

Design by jvg.network on MakerWorld (license: BY).