Little Debbie StrawTopper

I made a straw topper of the Little Debbie Christmas Tree Cake. There are 2 versions. 
 

The first is 3 pieces and uses the AMS. They have a tight fit but will require a little super glue.

The Second is upright and will require post process painting or sharpie for coloring. You could use the AMS for this version but it would take a substantial amount of time.

The basis of this came from Unholyorders82 Little Debbie Box.

If you print the upright version that needs post process painting I found that a red and green sharpie marker worked great. Just be sure to clear coat the print first so the sharpie doesnt bleed if you go that route. 

Both models will require a tiny bit of support.

SIZING - Please note this model has a hole size of 10mm as it is. Some straws may be too big. Due to the odd shape of the tree, it was difficult to get a hole any larger without it cutting out the sides of the tree. More width = Odd proportions. Larger Overall Scale = Tree too tall. You can still increase the overall scale with ease in Studio if your straw is long enough. 

Design by Smitty010203 on MakerWorld (license: BY-SA).