Minimalist Wallet With Coin Tray

Required materials

• M3 screws, 4mm long 8x
• Elastic band, 20mm wide 1x

Assemble the Wallet:

• The wallet can be used in different configurations:
  • One Side: Assemble using only one side.
  • Two Sides: Use both sides for added protection.
• If using two sides:
  • Place your cards between the two sides to shield them from wear and tear.
  • Each side consists of two separate pieces screwed together with eight M3 screws. Make sure the screws are short enough not to protrude from the other end.
  • Choose between countersunk screws (for a slimmer profile) or regular screws.
• Elastic bands will secure the wallet components.

Elastic Band Setup:

• Cut elastic bands to the appropriate length based on the number of cards you’ll carry.
• Sew the ends of the bands together to form loops.
• Here are the band configurations:
  • One Side:
    • Assemble with one or two elastic bands.
    • Both bands hold cards or money.
  • Two Sides:
    • Assemble with one, two, or three elastic bands.
    • One band holds the two sides together.
    • The other one or two bands secure money or extra cards.

Orientation and Finishing Touches:

• Ensure all parts are oriented correctly during printing. The sides facing the build plate should face outward.
• If using two sides, consider slightly sanding the edges facing the cards for easier card insertion.
• The screws can be inserted and removed multiple times before the threads wear out.

Design by Rijno on MakerWorld (license: BY-SA).