Model rocket for B-class motor

Small model rocket designed for flying on b-class motors. Includes recovery bulkhead and nosecone recovery hook.

May require some masking tape around coupler to tighten fit. Glue nosecone into forward tube only after recovery system is in place (difficult to reach hook otherwise).

Use hot glue to attach and fillet fins. You can place the model “motor” inside the aft in order to prevent the fins from pushing too far in.

Hot glue should also be used to attach the recovery hook in the nosecone, and the recovery bulkhead. Position the recovery bulkhead by placing it in the aft tube and pushing it down with the forward coupler. Then hot glue in place (add a large dab and move hot glue around while still malleable).

Design by linguini1 on MakerWorld (license: BY).