MOMO AYASE (Dandadan, coloreada del manga)
MOMO AYASE (Dandadan, coloreada del manga)
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
Project: momo.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100.26x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyTerra Army Blue Transmission Distance: 0.3
PLA BambuLab Basic Orange Transmission Distance: 7
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Army Blue
At layer #15 (1.28mm) swap to Orange
At layer #17 (1.44mm) swap to Sakura Pink
At layer #21 (1.76mm) swap to Beige
At layer #25 (2.08mm) swap to Jade White for the rest.
Design by benito valentin on MakerWorld (license: CC0).