Music Hue Forge
Music Hue Forge
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mm
The Model is 250x250mm in size. Be sure to only scale X and Y as needed. Z height must not change.
You may print at higher layer heights below the Min Depth of 0.44mm
The Max Depth is 4.3mm and the Actual Depth is 2.7mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA+ Esun Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Green Transmission Distance: 2
This print uses 7 unique filaments
Swap Instructions:
Start with Charcoal
At layer #7 (0.92mm) swap to Marine Blue
At layer #8 (1.04mm) swap to Blue
At layer #10 (1.28mm) swap to Dark Red
At layer #13 (1.64mm) swap to Orange
At layer #15 (1.88mm) swap to Yellow
At layer #17 (2.12mm) swap to Green
At layer #19 (2.36mm) swap to Yellow for the rest.
Design by jeffrudzinski.prestige on MakerWorld (license: CC0).