Necklace Holder for Ikea PAX

I designed this necklace holder to fit into large Ikea PAX wardrobes, by simply sticking it into the holes. The individual pegs can be press fit into the holder at the desired locations. Fits 21 smaller pegs, or 11 larger pegs. If the fit is too tight, I recommend filing the bottom of the peg to be more tapered, as the brim tends to fill the chamfer. When printing the pegs, I recommend raising the bed temperature 5–10 degrees as adhesion can be an issue, and will cause the print to fail.

The raw STL of the holder is too large to fit on typical Bambulab printers, and must be cut (ideally with a dovetail) to be printed. This is already done in the provided printing profile.

Design by eira132 on MakerWorld (license: BY-SA).