Parametric Manga Stand Generator

Fully Parametric Manga & Comic Organizer / Desk Stand (Customizable)

This is a fully parametric organizer designed specifically for Mangas, Graphic Novels, and Light Novels. It features a clean, flush design with a solid back wall, an integrated hollow base to save material, and smooth, rounded front corners that slope elegantly down to the desk.

Since this model is powered by OpenSCAD, you don't need any 3D modeling experience! Just use the "Customize" button right here on MakerWorld to change all settings to your exact needs before downloading.

🌟 Features

• 100% Parametric: Instantly change the number of slots, slot width, and wall thickness.
• Hollow Base (Toggleable): Built-in hollow stand that elevates your books, saves tons of infill/filament, and prints easily.
• Smooth Front Edges: The front corners smoothly curve downward to prevent sharp edges and make sliding books in and out effortless.
• Flush & Square: The back wall and side dividers align perfectly for a clean, modern aesthetic.

⚙️ How to Customize on MakerWorld

1. Click the "Customize" button on this page.
2. Adjust the settings in the parameter panel on the right:
   • Slot Count: Set how many mangas you want to store next to each other.
   • Slot Width: Measure your thickest manga and add 1–2 mm of clearance.
   • Wall Thickness: 2 to 3 mm is highly recommended for optimal stability.
   • Corner Radius: Adjust how aggressive or gentle the front curve slopes downward.
   • With Base: Check the box to activate the hollow stand underneath, or uncheck it for a flat floor version.
3. Check the real-time preview.
4. Click "Generate" and download your custom STL or 3MF file! 

🖨️ Print Settings Recommendation

• Material: PLA, PETG, or a beautiful Rainbow/Coextruded Filament (looks stunning on the parallel vertical dividers!).
• Infill: 10% to 15% (Gyroid recommended).
• Supports: No supports needed! The hollow base is designed to bridge cleanly, and the rounded front corners print smoothly without overhang issues.
• Walls/Perimeters: 3 walls for maximum durability of the dividers

📝Designed with passion by D4RK @Animefanlove. If you like my design, please leave a ⭐⭐⭐⭐⭐ 5-star review and share your printed makes in the comments! Happy printing!

Design by D4RK on MakerWorld (license: BY).