Pottery stamp blank

pottery stamp blank you just have to put your extruded design on the head. Make sure to mirror your design so it is readable on its imprint. for lettering try to have it be at least  .5 mm thick. And have your design be extruded .75mm high for optimal imprinting. the stamp has a notch in the handle for alignment so you don't have to look at the bottom of the stamp for orientation 

Print settings 

25% infill at least 

enable top surface ironing

enable thin wall detection especially for lettering 

i used pla tough and it turned out very well

Design by Buckman on MakerWorld (license: BY-ND).