Reinforced Rose Stem

The problem with this type of model is that it is thin and tall. This means that the toolhead will wiggle it around when printing the out layer, causing quality issues and even print failure.

The changes described below mitigate these issues and provide a far better print quality when printing this model vertically.

• Reduced Sparse Infill Density to 15% to avoid solid infill and therefore, improve print quality when the toolhead is printing the top part
• Increased width at the base of the stem by introducing a cone shape - this helps with reducing the wiggles introduced by the toolhead.

Design by just.gil on MakerWorld (license: BY).