Satellite Speaker Stand - Teufel Concept E

Simple Stand for Satellite Speakers with a threaded screw in the back - designed to fit my old Teufel Concept E Satellites

The model is designed to hold the speaker in different orientations, best is a 30 degree downward angle though. 

The stand consists of two feet that get screwed into the ground with simple 3mm Screws. The feet are connected by 3x M4 x 30 screws. At the bottom there are two which pass through the “Stand Connector” and screw into some M4 x 6mm heat set threads.

At the top, the “Horizontal Holder” has a through-hole to attach the speaker to the stand using an M6 x 12 screw. On the horizontal the third M4 x 30 screw connects the two feet through the horizontal holder and screws into a M4 x 8mm heat set thread. 

I printed the stand in PETG but PLA will probably also work. 

The model was created in Onshape: https://cad.onshape.com/documents/2dc637e11f2832b746712ab4/w/ddab17b527238928706b5eb3/e/51399480f561e44dcdd39749?renderMode=0&uiState=67ec2cd665d2e33535682ac3

Design by Chris on MakerWorld (license: CC0).