Set of 8 Animal ink bookmarks - Hueforge

Set of 8 ink bookmarks - 2 colours

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 51.5x154mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.36mm

Filaments Used:
PLA BambuLab Basic Black  Transmission Distance: 0.6
PLA sun lu white  Transmission Distance: 6.8
This print uses 2 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #8 (0.72mm) swap to sun lu white for the rest.

 

Design by 3dGlow on MakerWorld (license: BY-ND).