Simple shelf with arch cut

I didn't know how to change it in Print Profile so i will left that information here:

It took me about 19 hours to print everything and it consumed about 630g of filament

Simple shelf with an arch cut in it so it would fit space between my bath and shower. 

Of course You can use 1 colour or paint that white legs, up to Your idea

Model is divided in 4 parts - 3 countertops and file of legs. 

Everything is connected in easy “push-in” way but still holds solid. 

If You want to stiffen the shelf even more You can of course use glue. 

If You struggle with connecting legs to one of countertops just gently wiggle it or try slowly screwing in the leg joint. 

Total height - 560mm (measured from the ground) 

“1'st floor” height - about 290mm

2nd floor height - about 240mm

1 leg (without joint) - 210mm

1 leg (with joint) - about 225mm

You can easily change it's dimensions by either scalling it or streching/shortening leg's in blender for example. 

Design by Przemek on MakerWorld (license: BY).