Skadis 3 / 4 Hotends Bambu Lab Holder

I was asked if I could create a hotend holder similar to my existing version for the A1 (mini).

So here it is, a holder for 3 or 4 assembled Bambu Lab hotends (X1…/P1…) for Ikea Skadis.

No support needed. Just print as oriented in the stl files and take care that the pegs are massive.

I used a modifier cube with 100% concentric infill (see print profile).

The holder is quite flat, so I recommend using the Skadis Lock Plug (10mm) to prevent the holder from sliding out of the pegboard holes.

Design by schiko on MakerWorld (license: BY-SA).