Slanted 4-Slot Universal Remote Caddy / Holder

This is a clean, sturdy, and modern slanted remote control caddy designed to finally organize that cluttered bedside table, coffee table, or desk. The four large compartments are sized to fit a wide variety of remotes and office supplies, with a sloping front profile for easy access to the buttons of the remotes.

It was specifically designed to handle the larger BedJet 3 remote and multiple standard controllers like an Amazon Fire TV remote and a standard ceiling fan controller, all of which are shown in the example photo.

Features:

• 4 Large Compartments: A 2x2 grid to hold multiple devices or items.
• Slanted Front: Easier to see and grab your remotes, and allows you to use a remote (like the BedJet) directly from the caddy.
• Sturdy Base: Large footprint for stability.
• Print-in-Place: No supports or assembly needed. The example was printed cleanly right off the textured PEI bed.

Technical Dimensions (Crucial for other users):

• Grid: 2x2 compartments.
• Individual Slot Size: 57mm x 33mm.
• Front Height (Short Side): ~73mm.
• Back Height (Tall Side): ~119mm.
• Footprint: ~ 123mm x 75mm.

Recommended Print Settings:

The example shown was printed on a Bambu Lab printer (from the build plate text) and looks excellent. This design is robust and does not need extreme settings.

• Filament: PLA, PETG, or ABS (PLA used in photo).
• Layer Height: 0.2mm - 0.28mm is fine. A lower layer height might make the curves on the top edge smoother.
• Infill: 15-20% (Grid, Gyroid, or Rectilinear).
• Supports: No supports required.
• Rafts/Brim: Not needed if your bed adhesion is good.

File Downloads

I have provided both the standard .STL mesh file for generic use and a .3mf file (best for MakerWorld users) which may contain a pre-sliced print profile.

Enjoy a cleaner desk, end table, or nightstand! Please post a make or rating if you print it, and let me know which remotes you fit inside.

Design by Caroline on MakerWorld (license: BY).