Small but Strong! - Remix of Brick Fridge Magnets

This is a remix of the original brick fridge magnet design (LEG-Os like), with a focus on a smaller, more discreet profile. Size is around 25% of the original, with just one but larger magnet, that is concealed in the body. It's still pretty strong for anything you are putting on your fridge!

Key changes:

• Reduced size: The overall dimensions have been shrunk down for a minimalist look.
• Hidden magnet: Instead of multiple magnets, this version uses a single, concealed 12mm x 2mm magnet. This provides a clean appearance with no visible magnets.
• Integrated pause: The model includes a pause at a specific layer height, allowing you to easily insert the magnet during the printing process.

Printing & Assembly:

• The model is designed with a cavity to perfectly fit the 12mm x 2mm magnet or 12mm x 3mm magnet.
  • Original is with 2mm magnet which is strong enough. Added 3mm version as it's only one available in maker supply.
• No supports are needed for printing.
• Simply start the print and, when prompted by your slicer software, pause the print at the designated layer height.
• Insert the magnet into the pre-designed slot.
• Resume the print to enclose the magnet within the model.
• Ironing included - adds almost no time and makes printed model much nicer!

Advantages:

• Sleek design: The hidden magnet gives these brick magnets a polished and modern aesthetic.
• Strong hold: Despite its small size, the 12mm x 2mm magnet provides a surprisingly strong hold on refrigerators and other metal surfaces.
• Easy to print: The model is optimized for easy printing and requires no supports.

Note:

• Ensure your printer is calibrated correctly for a snug fit of the magnet.

Enjoy adding a touch of brick fun to your fridge or other magnetic surfaces with these compact and stylish magnets!

Design by PiTRiS on MakerWorld (license: BY-SA).