Small storage box

This is a small box I created to store pieces for a board game.

1. It has holes to places small magnets to ensure the box stays nicely closed.

Magnets are very cheap and can be purchased for $0.08 at the time of writing

https://www.amazon.com/TRYMAG-Different-Neodymium-Refrigerator-Whiteboard/dp/B096ZQS65Z/ref=sr_1_3?keywords=magnets&qid=1696879605&sr=8-3&th=1

Be sure to use 6x3mm magnets or smaller.

The printer will pause when you have to insert the magnets.

The printer will then print over and the magnets will be completely invisible in the final result.

2. It uses screws for the rotation of the lid.

I recommend using heated M3 inserts. They can be purchased for $0.1 each.

https://www.amazon.com/ruthex-M3-Threaded-Inserts-RX-M3x5-7/dp/B08BCRZZS3/ref=sr_1_8?crid=39T25PB51YP0E&keywords=m3%2Binserts&qid=1696879892&sprefix=m3%2Binsert%2Caps%2C156&sr=8-8&th=1

3. You can then use M3 screws with the heated inserts on both sides.

Design by devnix on MakerWorld (license: BY).