Sonic The Hedgehog 200x200

The fastest thing alive, currently doing absolutely nothing other than waiting on his next chilli dog and looking cool. This portrays the classic Sega icon with his arms crossed, radiating pure 90s impatience. Fight on against Dr. Robotnik and forget the weird name changes that came over the years Dr. Egg Who? ;) 


Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.32mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #0056b8 PLA BambuLab Basic Cobalt Blue  Transmission Distance: 0.8
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3
    #de4343 PLA BambuLab Matte Scarlet Red  Transmission Distance: 2
    #56b7e6 PLA BambuLab Matte Sky Blue  Transmission Distance: 1.3
    #e8dbb7 PLA BambuLab Matte Desert Tan  Transmission Distance: 1
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 7 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #10 (0.88mm) swap to BambuLab Basic Cobalt Blue
    At layer #12 (1.04mm) swap to BambuLab Matte Mandarin Orange
    At layer #13 (1.12mm) swap to BambuLab Matte Scarlet Red
    At layer #15 (1.28mm) swap to BambuLab Matte Sky Blue
    At layer #20 (1.68mm) swap to BambuLab Matte Mandarin Orange
    At layer #23 (1.92mm) swap to BambuLab Matte Desert Tan
    At layer #25 (2.08mm) swap to BambuLab Matte Ivory White for the rest.
 

Design by Side Quest Hues on MakerWorld (license: BY-ND).