Storm Trooper Hueforge 492x690

This Hueforge is nine 164x230 separate Hueforge's put together. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 164.2x230mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.3mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Gray Transmission Distance: 2
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Jade White
    At layer #19 (1.6mm) swap to Gray for the rest.
 

Design by user_2863568403 on MakerWorld (license: BY).