Tiger Breakout - hueforge

Tiger wall breakout - 4 colours

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.4mm

    #000000 PLA Sunlu Matte Black  Transmission Distance: 0.1
    #ffffff PLA sunlu white  Transmission Distance: 6.8
    #c12e1f PLA BambuLab Basic Red  Transmission Distance: 3.8
    #f4ee2a PLA BambuLab Basic Yellow  Transmission Distance: 5.3
This print uses 4 unique filaments

Swap Instructions:
    Start with Sunlu Matte Black
    At layer #8 (0.72mm) swap to sunlu white
    At layer #10 (0.88mm) swap to BambuLab Basic Red
    At layer #18 (1.52mm) swap to BambuLab Basic Yellow
    At layer #21 (1.76mm) swap to sunlu white for the rest.

 

Design by 3dGlow on MakerWorld (license: BY-ND).