Tiger - Double exposure hueforge

Tiger double exposure hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.16mm
 

Filaments Used:
PLA BambuLab Basic Black  Transmission Distance: 0.6
PLA BambuLab Basic Red  Transmission Distance: 3.8
PLA BambuLab Basic Yellow  Transmission Distance: 5.8
PLA BambuLab Basic Jade White  Transmission Distance: 5.7
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #14 (1.2mm) swap to Yellow
    At layer #20 (1.68mm) swap to Jade White for the rest.

 

Design by 3dGlow on MakerWorld (license: BY-ND).