Treble Hook Keeper Rod Clip 12p4mm V1

Rod-mounted holder for a treble hook safety cover.
 

This clip is designed for a fishing rod diameter of about 12.4 mm and is made to hold the Y-shaped treble hook protector from this model:
https://makerworld.com/en/models/647410-fishing-lure-treble-hook-safety-covers#profileId-582545
 

The treble hook cover slides into the flat jaws, while the C-clip snaps around the rod. The clip has internal grip ribs to reduce rotation on the rod.

Recommended print settings:
- Material: PETG
- Layer height: 0.16 mm
- Walls: 4
- Infill: 35-40%, Gyroid
- Supports: off first; if needed, use Tree(auto), build plate only
- Bed adhesion: Outer brim only, 5-8 mm
- Print orientation: standing upright with the C-clip cylinder vertical
 

Note: This upload is only the rod-mounted clip. The treble hook safety cover itself must be printed separately from the linked model. Rod diameters may vary, so test fit gently before forcing it onto the rod. Only tested on Medium and large hook covers

Design by user_1565386705 on MakerWorld (license: BY).