Tube and Chain Protection - Minimal
Tube and Chain Protection - Minimal
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
Update: Also works for the P2S. Replace the stock bit of foam tape with a more permanent solution.
Bambulabs started shipping printers with the top screw shortened and covered, so I modified this to just cover the side screw. That screw is partially covered, but this provides better protection and just snaps in place. This has been in use for many hundreds of hours of use, so it's secure.
If you've got an enclosed printer and print anything hotter than PLA, you should print this in PETG or other higher-temp filament. Otherwise (open printer or PLA-only), PLA is good enough. Profiles are for 0.6 nozzle because that's what I'm running.
Just print it and snap it in place. If it's not snapping in, rotate it 90 degrees; the orientation needs to match the steel bits that partially cover the screw.
Design by GC3D on MakerWorld (license: BY).