UFO - Hueforge - 4 colour

UFO - 4 colour - Hueforge 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 1.12mm
The Max allowed Thickness is 3.36mm and the Actual Thickness is 2.8mm

Filaments Used:
    #000000 PLA Sunlu Matte Black  Transmission Distance: 0.1
    #c12e1f PLA BambuLab Basic Red  Transmission Distance: 3.8
    #f4ee2a PLA BambuLab Basic Yellow  Transmission Distance: 5.3
    #ffffff PLA sunlu white  Transmission Distance: 6.8

This print uses 4 unique filaments

Swap Instructions:
    Start with Matte Black
    At layer #14 (1.2mm) swap to Red
    At layer #19 (1.6mm) swap to Yellow
    At layer #26 (2.16mm) swap to white for the rest.

Design by 3dGlow on MakerWorld (license: BY-ND).