Werewolf Can Holder / Beer mug

Can holder in the shape of the Werewolf

Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz or 330ml (slim) cans (link below)

Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, Automatic Tree supports (at least 28°), blocked supports inside the mouth (pic).

Or just use my profile:)

If you want to have the handle on the opposite side, just right-click on the object in the slicer and put mirror by the Y axis.

Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans, and 10mm riser if you want better access to the top. They are scalable, so you can make them smaller or larger in your slicer.

https://makerworld.com/cs/models/1499777-can-holder-riser-inserts-12oz-slim-330ml-scalable#profileId-1568806

Happy printing:)

Design by RUMcajz on MakerWorld (license: BY).