Wolf 4 color hueforge
Wolf 4 color hueforge
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
Really nice hue forge print that turned out amazing, can be done with out AMS just need to pause and swap colors at appropriate layer heights. Should be able to just down load, select color and hit print with my setting in the profile.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Basic Blue Gray
PLA BambuLab Basic Silver
PLA BambuLab Basic Jade White
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Grey
At layer #20 (1.68mm) swap to White for the rest.
Design by TJSlayer on MakerWorld (license: BY).