Zombie Can Holder / Beer mug

Zombie Can Holder

Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz or 330ml (slim) cans (link below)

Recommended print settings: PLA, 0.2mm layers, 2-3walls, 8-10%gyroid, Automatic Tree supports (at least 26°), block supports inside the mouth - behind the teeth (even small places) , or just use my profiles.

Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans, and 10mm riser if you want better access to the top. Both are scalable, so you can make them smaller or larger in your slicer.

https://makerworld.com/cs/models/1499777-can-holder-riser-inserts-12oz-slim-330ml-scalable#profileId-1568806

Happy printing:)

Design by RUMcajz on MakerWorld (license: BY).