6 inch Propellers
6 inch Propellers
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
Here the long awaited V3 of my 6 Inch propeller design.
The V2 version suffered with a weak connection of the blades to the hub. This has been addressed by increasing the thickness of the connection point while still maintaining aerodynamics. The leading and trailing edges have also been made modified to aid performance.
This prop has been designed with a 35mm pitch and to fit 6mm motor shafts. The same style of chamfered inserts has been kept to ensure a tight fit allowing it to be compatible with 1,2,3,4 and 5mm shafts along with the standard 6mm shafts.
In addition to the 2,3 and 4 bladed options, the V3 version also includes 5 and 6 blade variants to try.
Spec:
Diameter: 149.72mm / 5.89”
Radius: 74.86mm
Height: 12mm
Pitch: 35mm
Shaft diameter: 6mm (inserts for 1,2,3,4 & 5mm)
Blades: 2,3,4,5 and 6 Blade variants
As a rough guide here are the weights and approximate print times for all the components using PLA at 100% infill and printing at 0.2 resolution/layer height.
2 Blade: 4.00g - 20m
3 Blade: 5.44g - 27m
4 Blade: 6.85g - 33m
5 Blade: 8.34g - 39m
6 Blade: 9.80g - 46m
All Inserts: 1.65g - 12m
Your feedback with these designs is really helpful so please share your prints and opinions on where improvements could be made. Any advice will be greatly appreciated!
Happy printing!!
Update 25/11/2024:
As requested i have also added an extra insert for 1mm shafts
Design by Watts on MakerWorld (license: BY-ND).