A1/A1 mini All In One 3D printer test 2024 Version

A1/A1 mini All In One 3D printer test 2024 Version

1. Printer:
2. A1 Mini
3. Rafts: No
4. Supports: No
5. Resolution:200um
6. Infill:100%
7. Notes: BE SURE TO PRINT THIS WITHOUT SUPPORTS AND WITH 100% INFILL!

• Overhangs: The numbers on the arc are the angle (in degrees) from vertical. You can use this to help determine what overhang level you need to think about adding supports to you print to get good output
• Bridging: The bridges tucked underneath the arc help determine whether your printer is able to bridge between two points well. Lookout for sagging or droping here and use it to tune things like bridging speed and part cooling
• Stringing & Retraction: The small square towers (and also the "temple") make it easy to see how much stringing you're likely to get in your prints, Useful for trying out modifying retraction & temperature settings.

*MINI* All In One 3D printer test by majda107 - Thingiverse

by majda107 is licensed under the Creative Commons - Attribution license.

Design by Sculptr on MakerWorld (license: BY).