A1 and A1 mini extruder and build plate light

This light helps with seeing the filament in poop shoot and on build plate. I like to make sure there is no lifting of the first layer and to make sure everything is working the way that it should. The light is easily removeable remove rubber band and slid light forward so you can still get to the hot end for maintenance. Not fond of the wires on the side but they are out of the way of all working parts. The wires are tapped in to the 24 volt fan in the back as you can see in the pic along side of the fan wires. You do have to glue the lid to the box a little dab will do.

                                                                                                                  I am in no way RESPONSABLE for your printer.

                                                                                                                  I do recommend a multimeter you can get one from Harbor Freight.

                                                                                                                   https://www.harborfreight.com/7-function-digital-multimeter-59434.html

Parts that you will need

1. Buck converter https://www.amazon.com/gp/product/B07SJFTD7F/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
2. Wire  https://www.amazon.com/gp/product/B07T4SYVYG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
3. Wire ends https://www.amazon.com/gp/product/B07R1H3Z8X/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1  https://www.amazon.com/gp/product/B0791DJMW9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 
4.  Led lights https://www.amazon.com/gp/product/B08P5MWVNH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
5. Rubber band

Design by Darrell on MakerWorld (license: CC0).