Axolotl Fantasy Bookmark 6 Colours 1 AMS

🌈 This is a 6-Color Bookmark! 🌈

This print can be completed with a single AMS, but you will need to adjust the filament order correctly:

• Set the first four colors (Pink, Black, Dark Blue, Marine Blue) as normal.
• The last two colors (Ice Blue and White) must be swapped after the first two layers (Pink and Black) are finished.
• Swap Color 5 to Slot 1 and Color 6 to Slot 2 after the initial layers have printed.

Axolotl Fantasy 3D Printed Bookmark – Multi-Color Layered Design 🦎✨

Dive into a whimsical underwater world with this stunning axolotl bookmark! Featuring two playful axolotls surrounded by bubbles and splashes, this design is full of color, energy, and life. Perfect for aquatic lovers, fantasy fans, and bookworms alike!

Filaments & Color Swap Instructions:

This print uses 6 unique filaments for a vibrant, multi-layered effect:

• Start with Pink
• At layer #7 (0.64mm), swap to Black
• At layer #9 (0.8mm), swap to Dark Blue
• At layer #15 (1.28mm), swap to Marine Blue
• At layer #17 (1.44mm), swap to Ice Blue
• At layer #22 (1.84mm), swap to White (for the rest of the print)

🛠 Filaments Used:
✔ PLA BambuLab Basic Pink – Transmission Distance: 8
✔ PLA BambuLab Basic Black – Transmission Distance: 5
✔ PLA BambuLab Matte Dark Blue – Transmission Distance: 1
✔ PLA BambuLab Matte Marine Blue – Transmission Distance: 5
✔ PLA BambuLab Matte Ice Blue – Transmission Distance: 5
✔ PLA BambuLab Basic White – Transmission Distance: 5

Recommended Print Settings:

✅ Layer Height: 0.08mm (for fine details)
✅ Base Layer Height: 0.16mm
✅ Infill: 100% (for durability and depth in raised details)

Design by Lilith3dPrint on MakerWorld (license: BY-ND).