Black and white chinese dragons hueforge 200x200
Black and white chinese dragons hueforge 200x200
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
hueforge de dos impresionantes dragones chinos
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA smartfil negro Transmission Distance: 0.4
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with negro
At layer #7 (0.64mm) swap to Jade White
At layer #15 (1.28mm) swap to negro
At layer #18 (1.52mm) swap to Red
At layer #21 (1.76mm) swap to Yellow for the rest.
Design by Mysstra3Dart on MakerWorld (license: BY).