Bob Marley having a smoke

Bob Marley Hueforge

2 colors 

recently started practicing and loved how this came out so I am sharing it!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 144.33x200mm in size

You may print at higher layer heights below the Min Depth of 0.88mm

The Max Depth is 2.2mm and the Actual Depth is 1.6mm

Filaments Used:

SUNLU PLA+ Black Transmission Distance: 0.3

SUNLU PLA+ White Transmission Distance: 5

This print uses 2 unique filaments

Swap Instructions:

Start with Black

At layer #12 (1.04mm) swap to Jade White At layer 20 swap back to Black (1.72mm) for the rest. (Frame)

Design by Hypnotic on MakerWorld (license: CC0).